Code du produit : K708A

1HP 3600 575/3/60 TEFC 56HC REMOVABLE BASE FOUR IN ONE 4:1 CT ~ 10:1 VT PREMIUM EFFICIENT

1HP 3600 575/3/60 TEFC 56HC REMOVABLE BASE FOUR IN ONE 4:1 CT ~ 10:1 VT PREMIUM EFFICIENT

Informations supplémentaires :

• XRI® GENERAL PURPOSE MOTORS • THREE PHASE, TOTALLY ENCLOSED MOTORS • FEATURES: • Meets or exceeds all NEMA Premium® efficiencies • Ball bearings, mechanically locked on shaft end • 1.15 Service factor (except as noted) • Class F insulation (except as noted) • Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower, as noted • Rolled steel 56-145T frame motors accept brake kits, see accessories section, as noted • UL recognized, CSA certified and CE mark • Two year warranty on non bold blue catalog numbers • Three year warranty on bold blue catalog numbers • ADDITIONAL FEATURES FOR “FOUR-IN-ONE” MOTORS ONLY: • CR200 corona resistant magnet wire • Bolt-on, removable rigid base • Suitable for horizontal and vertical mounting • Will accept drip cover kits, see accessories section • Model 056T34F99010

Documents à télécharger :

Produits Complémentaires

Image C-Face Kits - Totally Enclosed Frame 56 6203 (17mm) bearing (standard frame)
A437
C-Face Kits - Totally Enclosed Frame 56 6203 (17mm) bearing (standard frame)
Image 56 FRAME SLIDING BASE
56W
56 FRAME SLIDING BASE
Image BRAKE KIT 3LBS/FT 575V
A297
BRAKE KIT 3LBS/FT 575V

Produits équivalents

Image 1HP 3600 575/3/60 TEFC 56C ROLLED STEEL PREMIUM 10:1 CT ~ 20:1 VT IP55 CLASS F 1.15SF REMOVABLE BASE
MPRP-102CH
1HP 3600 575/3/60 TEFC 56C ROLLED STEEL PREMIUM 10:1 CT ~ 20:1 VT IP55 CLASS F 1.15SF REMOVABLE BASE
Image 1HP 3600 575/3/60 TEFC 56C Steel Edge NEMA Premium ROLLED STEEL RIGID BASE 1.25SF
U1P1GC
1HP 3600 575/3/60 TEFC 56C Steel Edge NEMA Premium ROLLED STEEL RIGID BASE 1.25SF